跟隨耶穌 得著生命

Audio Setup Procedures:

1) Move the entire cart to the front of the room. Do not remove the mixing console and the wireless receiver box out of the cart. Do not disconnect any cables or microphones.

2) ****Make sure the master volume is set low.******

3) Connect the speaker cables (2 cables on the left side of the cart) to the wall socket interface.

4) Connect the piano cables (2 cables on the right side of the cart) to the piano "Outputs".

5) Connect power strip AC to the wall output and make sure the power strip is being switched ON.

6) Power on each microphone On/Off switch on the mixing console.

7) Power on the wireless receiver box and the wireless headset.

8) Gradually turn up the master volume control.

9) Sound check of each microphone.

10) If everything is tested okay.. we are good to worship...

萬民歸主教會